The correct process of using anti-static wrist strap
Anti-static wrist strap is a commonly used equipment in anti-static equipment. It is used in many production lines. Its main function is to conduct the static electricity of the human body to the ground. Function, the following editor will teach you the correct process of using the wrist band.
One: The user needs to reach into the wrist strap of the anti-static wrist strap. In this process, it should be noted that there should be no clothing isolation between the human skin and the wrist strap, and the lock buckle can be tightened.
Second: Insert the grounding wire of the anti-static wrist strap into the socket of the wrist strap, and then connect the other end to the grounding socket. In this process, it should be noted that the grounding socket of the anti-static wrist strap should always be connected to the ground.
Third: The anti-static wrist strap cannot be used all the time, because the staff will continue to wear the connecting wire of the wrist strap while working, and long-term wear will cause the copper wire inside the connecting wire to be disconnected. An anti-static wrist strap is generally The use time limit is about 1-3 months. Therefore, the anti-static wrist strap needs to be tested regularly during use to ensure the normal use of the wrist strap.
Fourth: After using the anti-static wrist strap for a certain period of time, it needs to be replaced even if it is not completely damaged. Because the internal loss will cause the conductive function of the wrist strap to decrease, making it unable to normally guide the static electricity of the human body, so it must be replaced in time.
The above are the correct procedures for the use of the anti-static wrist strap. Of course, the user should be careful during use. Do not pull the connecting wire of the wrist strap hard, otherwise the copper wire inside the connecting wire will be easily broken.
